12V 3A 36W Ultra Slim LED Switching Power Supply SMPS
| Part Number | 12V 3A 36W Ultra Slim LED Switching Power Supply SMPS |
| Description | The 12V 3A 36W Ultra Slim LED Switching Power Supply SMPS is designed primarily for powering 12V LED strip lights and other compatible indoor lighting systems. It accepts a wide 110–265V AC input at 50–60Hz and converts it into a regulated 12V DC output at up to 3A, providing a rated output capacity of 36W. Its ultra-slim construction makes it particularly useful where installation space is limited. The compact silver/grey enclosure can be integrated into LED strip installations, mirror lighting, cabinets, displays, signage, and decorative lighting systems. The switching design provides approximately 90% efficiency, while built-in overvoltage and overcurrent protection provide additional protection against abnormal electrical conditions. Although LED lighting is the primary application, the power supply can also operate compatible general-purpose 12V DC devices, provided their total current and power requirements remain within the rated 3A / 36W capacity. |
| Manufacturer | GENERIC |
| Category | Power & Driver Boards & Modules |
12V 3A 36W Ultra Slim LED Switching Power Supply SMPS Specifications
| Product Type | LED Switching Power Supply / SMPS |
| Display Size | 1.3 Inch |
| Display | LED |
| Display Color | Refer to product variant |
| Measuring Range | DC 3.7V–30V |
| Connection | 2-Wire |
| Measurement | DC Voltage |
| Mounting | Screw Mount |
| Housing | Plastic |
| Installation | Embedded Panel Mount |
| Voltage Range | 3.7V–33.6V |
| Display Type | OLED |
| Panel Mount | Yes |
| Real-Time Display | Yes |
| Compact Design | Yes |
| Low Power Consumption | Yes |
| Reusable | Yes |
| catch_source | chippk |
| Brand | GENERIC |
| Subcategory | Power Management & Converter Modules |
| Product Line | Modules & Accessories |
| Resolution | 128 × 64 Pixels |
| Controller | SSD1306 |
| Interface | I2C / IIC |
| Operating Voltage | 3.3V to 5V DC |
| Typical Current Consumption | Approx. 10–20mA |
| All Pixels ON Current | Approx. 25–30mA |
| Black Screen / Driver Active | Approx. 1.5–4mA |
| Approx. Power at All Pixels ON | ~0.08W |
| Number of Pins | 4 |
| Communication Lines | SCL, SDA |
| PCB Color | Blue |
| Backlight | Not Required |
| Compatible Cell Format | 18650 |
| Number of Cells | 1 Cell |
| Nominal 18650 Cell Size | Approx. 18mm × 65mm |
| Holder Configuration | Single Cell |
| Holder Style | Open |
| Length | 73–76mm |
| Width | 20–21.5mm |
| Height | 17.7–20mm |
| Wire / Lead Length | Approx. 15–16cm (6 inches) |
| Weight | Approx. 8–10g |
| Connection Type | Pre-attached lead wires |
| Wire Colors | Red and Black |
| Polarity Marking | + / − |
| Contact Design | Spring and fixed metal contacts |
| Mounting Provision | Central mounting hole |
| Body Color | Black |
| Digit Height | 0.7 Inch |
| Number of Digits | 1 |
| Number of Segments | 7 Segments + Decimal Point |
| Mounting Type | PCB Mount |
| Viewing Direction | Front View |
| Package Type | DIP |
| Battery Type | Lithium-ion (Li-ion), Lithium Polymer (Li-Po) |
| Supported Cells | 1S–8S |
| Display Levels | Multi-level LED Indicators |
| Power Consumption | Low Power |
| Operating Temperature | Suitable for Indoor Electronic Applications |
| Battery Support | 1S–8S |
| Battery Chemistry | Li-ion / Li-Po |
| Low Power | Yes |
| PCB Mount | Yes |
| Battery Monitoring | Yes |
| Portable Applications | Yes |
| DIY Friendly | Yes |
| Controller / Driver | SH1106 |
| Current Consumption | Approx. 10–30mA |
| Power Pins | GND, VCC |
| Pin Configuration | GND → VCC → SCL → SDA |
| Model | YZC-131 |
| Rated Capacity | 10KG |
| Sensor Type | Strain Gauge Load Cell |
| Load Cell Type | Single Point |
| Material | Aluminum Alloy |
| Output Signal | Analog (mV/V) |
| Excitation Voltage | 5V–12V DC (Typical) |
| Cable Type | 4-Wire |
| Accuracy | High Precision |
| Capacity | 10KG |
| Technology | Strain Gauge |
| Output | Analog |
| Wide Bar Design | Yes |
| High Precision | Yes |
| Easy Installation | Yes |
| Converter Type | Boost |
| Maximum Output Power | 1200W |
| Input Voltage | 110–265V AC |
| Output Voltage | 12V DC |
| Maximum Output Current | 20A |
| Recommended Continuous Current | Up to 15A with adequate cooling |
| Conversion Efficiency | Up to 97% |
| Output Regulation | Constant Voltage (CV) & Constant Current (CC) |
| Cooling | Dual Aluminum Heatsinks |
| Protection | Overvoltage, Overcurrent |
| Adjustment | Multi-turn Potentiometers |
| Power Rating | 1200W |
| Maximum Current | 20A |
| Adjustable Output | Yes |
| Constant Voltage | Yes |
| Constant Current | Yes |
| High Efficiency | Up to 97% |
| Dual Heatsinks | Yes |
| Input Fuse | Yes |
| High Power | Yes |
| Input Frequency | 50–60Hz |
| Output Current | 3A |
| Rated Power | 36W |
| Efficiency | Approx. 90% |
| Design | Ultra Slim |
| Color | Silver / Grey |
| Usage | Indoor |
| Primary Application | LED Strip Lights |
| AC Input | 110–265V |
| DC Output | 12V |
| Switching Power Supply | Yes |
| Ultra Slim Design | Yes |
| Overvoltage Protection | Yes |
| Overcurrent Protection | Yes |
| Indoor Use | Yes |
| LED Strip Compatible | Yes |
| General 12V DC Use | Yes |
| LED Lighting Use | Yes |
Quick Inquiry
| In Stock | 432 - More on Order |
| Quote Limit | No Limit |
| Lead-Time | To be Confirmed |
| Minimum | 1 |
Please fill out the form below. We will contact you as soon as possible.
Add to cart
You can first add the current product to the shopping cart and then make a one-time inquiry.