1 Cell 18650 Lithium Battery Holder Case with Wires
| Part Number | 1 Cell 18650 Lithium Battery Holder Case with Wires |
| Description | The 1 Cell 18650 Lithium Battery Holder Case with Wires provides a convenient and removable connection for a single 18650 cylindrical battery cell. Its open holder design allows the cell to be inserted or replaced without soldering project wires directly to the battery. The holder features spring and fixed metal contacts, clearly marked positive (+) and negative (−) polarity positions, and pre-attached red and black lead wires measuring approximately 15–16cm (6 inches). A central mounting hole allows the holder to be secured inside a suitable project enclosure or electronics assembly. The holder measures approximately 73–76mm in length, 20–21.5mm in width and 17.7–20mm in height, with an approximate weight of 8–10g. It is designed for the 18650 cylindrical cell format, nominally around 18mm in diameter and 65mm in length. This 18650 battery holder is useful for DIY electronics, prototyping, embedded systems and custom battery-powered projects requiring a removable single-cell power source. The holder is a passive component and does not provide battery charging, voltage regulation or battery protection. Rechargeable Li-ion applications should use an appropriate charging and protection circuit according to the battery and project requirements. |
| Manufacturer | GENERIC |
| Category | General Modules & Accessories |
1 Cell 18650 Lithium Battery Holder Case with Wires Specifications
| Product Type | Battery Cell Holder |
| Display Size | 0.96 Inch |
| Display | 3-Digit LED |
| Display Color | Red |
| Measuring Range | DC 3.7V–30V |
| Connection | 2-Wire |
| Measurement | DC Voltage |
| Mounting | Panel Mount |
| Housing | Plastic |
| Installation | Embedded Panel Mount |
| Voltage Range | 3.7V–30V DC |
| Display Type | OLED |
| Panel Mount | Yes |
| Real-Time Display | Yes |
| Compact Design | Yes |
| Low Power Consumption | Yes |
| Reusable | Yes |
| catch_source | chippk |
| Brand | GENERIC |
| Subcategory | Prototyping & Hardware Accessories |
| Product Line | Modules & Accessories |
| Resolution | 128 × 64 Pixels |
| Controller | SSD1306 |
| Interface | I2C / IIC |
| Operating Voltage | 3.3V to 5V DC |
| Typical Current Consumption | Approx. 10–20mA |
| All Pixels ON Current | Approx. 25–30mA |
| Black Screen / Driver Active | Approx. 1.5–4mA |
| Approx. Power at All Pixels ON | ~0.08W |
| Number of Pins | 4 |
| Communication Lines | SCL, SDA |
| PCB Color | Blue |
| Backlight | Not Required |
| Compatible Cell Format | 18650 |
| Number of Cells | 1 Cell |
| Nominal 18650 Cell Size | Approx. 18mm × 65mm |
| Holder Configuration | Single Cell |
| Holder Style | Open |
| Length | 73–76mm |
| Width | 20–21.5mm |
| Height | 17.7–20mm |
| Wire / Lead Length | Approx. 15–16cm (6 inches) |
| Weight | Approx. 8–10g |
| Connection Type | Pre-attached lead wires |
| Wire Colors | Red and Black |
| Polarity Marking | + / − |
| Contact Design | Spring and fixed metal contacts |
| Mounting Provision | Central mounting hole |
| Body Color | Black |
Quick Inquiry
| In Stock | 620 - More on Order |
| Quote Limit | No Limit |
| Lead-Time | To be Confirmed |
| Minimum | 1 |
Please fill out the form below. We will contact you as soon as possible.
Add to cart
You can first add the current product to the shopping cart and then make a one-time inquiry.