1.3 Inch OLED Display 128x64 I2C SH1106 Module

Part Number	1.3 Inch OLED Display 128x64 I2C SH1106 Module
Description	The 1.3 Inch OLED Display 128x64 I2C SH1106 Module is a compact graphical display suitable for embedded electronics, IoT devices, robotics and microcontroller projects. Its 128×64 pixel resolution provides a useful display area for text, sensor readings, icons, menus, status information and simple graphics. The module uses the SH1106 display controller and communicates through an I2C/IIC interface. I2C communication requires only two signal lines, SCL and SDA, helping reduce the number of microcontroller GPIO pins required for the display. This module operates from 3.3V to 5V DC and uses four connections: GND, VCC, SCL and SDA. It can be integrated with popular development platforms including Arduino, ESP32, ESP8266, STM32 and Raspberry Pi when configured with suitable I2C and SH1106 software support. Current consumption is approximately 10mA to 30mA, depending on the number of illuminated pixels, displayed content, contrast settings and operating conditions. Unlike conventional LCD modules that use a separate backlight, OLED pixels are self-emissive. This provides strong contrast and makes the display suitable for compact user interfaces, monitoring systems and portable electronic projects.
Manufacturer	GENERIC
Category	General Modules & Accessories

1.3 Inch OLED Display 128x64 I2C SH1106 Module Specifications

Product Type	Battery Capacity Indicator Module
Display Size	1.3 Inch
Display	LED
Display Color	Refer to product variant
Measuring Range	DC 3.7V–30V
Connection	2-Wire
Measurement	DC Voltage
Mounting	Panel Mount
Housing	Plastic
Installation	Embedded Panel Mount
Voltage Range	3.7V–33.6V
Display Type	OLED
Panel Mount	Yes
Real-Time Display	Yes
Compact Design	Yes
Low Power Consumption	Yes
Reusable	Yes
catch_source	chippk
Brand	GENERIC
Subcategory	Display & Audio Modules
Product Line	Modules & Accessories
Resolution	128 × 64 Pixels
Controller	SSD1306
Interface	I2C / IIC
Operating Voltage	3.3V to 5V DC
Typical Current Consumption	Approx. 10–20mA
All Pixels ON Current	Approx. 25–30mA
Black Screen / Driver Active	Approx. 1.5–4mA
Approx. Power at All Pixels ON	~0.08W
Number of Pins	4
Communication Lines	SCL, SDA
PCB Color	Blue
Backlight	Not Required
Compatible Cell Format	18650
Number of Cells	1 Cell
Nominal 18650 Cell Size	Approx. 18mm × 65mm
Holder Configuration	Single Cell
Holder Style	Open
Length	73–76mm
Width	20–21.5mm
Height	17.7–20mm
Wire / Lead Length	Approx. 15–16cm (6 inches)
Weight	Approx. 8–10g
Connection Type	Pre-attached lead wires
Wire Colors	Red and Black
Polarity Marking	+ / −
Contact Design	Spring and fixed metal contacts
Mounting Provision	Central mounting hole
Body Color	Black
Digit Height	0.7 Inch
Number of Digits	1
Number of Segments	7 Segments + Decimal Point
Mounting Type	PCB Mount
Viewing Direction	Front View
Package Type	DIP
Battery Type	Lithium-ion (Li-ion), Lithium Polymer (Li-Po)
Supported Cells	1S–8S
Display Levels	Multi-level LED Indicators
Power Consumption	Low Power
Operating Temperature	Suitable for Indoor Electronic Applications
Battery Support	1S–8S
Battery Chemistry	Li-ion / Li-Po
Low Power	Yes
PCB Mount	Yes
Battery Monitoring	Yes
Portable Applications	Yes
DIY Friendly	Yes
Controller / Driver	SH1106
Current Consumption	Approx. 10–30mA
Power Pins	GND, VCC
Pin Configuration	GND → VCC → SCL → SDA